Premier 80 Epoxy Heat Shrink Sleeve (Premier 80 EHSS)
  • Premier 80 EHSS is a three-layer field joint coating system designed for corrosion protection of pipelines that operate up to a maximum operating temperature of 80ᵒC.
    • First layer: Two Part Epoxy primer, solvent free
    • Second layer: Hot Melt Sealant Adhesive preapplied to the polyolefin backing
    • Third layer: Thick-wall irradiated cross linked polyolefin
  • Uses:
    • Premier 80 EHSS is used to protect welded field joints in distribution and transmission networks
    • Mix the two components of epoxy primer. Ensure thorough mixing prior to application. Apply to a minimum thickness of 100 µm and covering at least 10 mm of the adjacent coating. While the epoxy is still wet, apply the sleeve. The adhesive should be heated before application. Once the sleeve is wrapped, the closure patch must be heated and applied. The whole sleeve should be heat-shrunk to fit tightly around the joint.
    • Service Temperature: up to 80°C
  • Characteristics:
    • Compatible with most standard pipe coatings
    • Stable over a wide temperature range
    • Suitable for protection of bare, replacement sections
    • Designed for long-term corrosion protection
    • Resistant to cathodic disbondment, and
    • Resistant to acid, alkali and salts
    • Engineered for high-soil stress environments
    • Resistant to vibration and substrate movement
  • Specification: 350mm x 30m; 450mm x 30m; 500mm x 30m – Total thickness: mean 2.85mm
  • Available In Stock
  • Origin: Premier Coatings – UK (England)